Behringer Eurorack MX3242X - Appendix; Technical Specifications

41
E
7. APPENDIX
7.1 Specifications
Mono input channels
Mic input Electronically balanced, discrete input configuration
Frequency response 10 Hz to 130 kHz +/- 3 dB
Distortion (THD&N) 0.007 % at -30 dBu, 1 kHz, 22 Hz to 22 kHz
Gain range +10 dB to +60 dB
Max. input +12 dBu
S/N ratio -125 dB, 150 Ohm source, 22 Hz to 22 kHz
-121 dBqp, 150 Ohm source, 22 Hz to 22 kHz
-126 dB, input shorted
-122 dBqp, input shorted
Line input Electronically balanced
Frequency response 10 Hz to 125 kHz +/- 3 dB
Distortion (THD&N) 0.006 % at +4 dBu, 1 kHz, 22 Hz to 22 kHz
Max. input +22 dBu
S/N ratio -97 dB, 150 Ohm source, 22 Hz to 22 kHz
Mix-B input Electronically balanced
Frequency response 10 Hz to 100 kHz +/- 3 dB
Distortion (THD&N) 0.005 % at +4 dBu, 1 kHz, 22 Hz to 22 kHz
Max. input +22 dBu
S/N ratio (Mix-B / Main Out) -94 dB, 150 Ohm source, 22 Hz to 22 kHz
Channel fader range +10 dBu to -
EQ
Low 80 Hz, +/- 15 dB
Lo Mid 50 Hz to 3 kHz, +/- 15 dB
Hi Mid 300 Hz to 20 kHz, +/- 15 dB
High 12 kHz, +/- 15 dB
Lo Cut filter -3 dB at 75 Hz, 18 dB/oct.
Main Mix
Max. output +28 dBu balanced on XLR
Aux Send max. output +22 dBu unbalanced on jack
Control Room output +22 dBu unbalanced on jack
Monitor output +22 dBu unbalanced on jack
Subgroup output +22 dBu unbalanced on jack
Digital Effects Processor
Converter 20-bit sigma-delta, 64/128-times oversampling
Sample rate 46.875 kHz
Power Supply
External Power Supply 150 Watts, 19" (482.6 mm), 2 HU (88 mm), approx. 7 kg
Mains voltage USA/Canada ~ 115 V AC, 60 Hz, Power Supply MX3242X-PSU-UL
U.K./Australia ~ 240 V AC, 50 Hz, Power Supply MX3242X-PSU-UK
Europe ~ 230 V AC, 50 Hz, Power Supply MX3242X-PSU-EU
Japan ~ 100 V AC, 60 Hz, Power Supply MX3242X-PSU-JP
Dimensions/weight
Dimensions (H*W*D, approx.) 21/22.5" (533.4/570 mm) * 19" (482.6 mm) * 3.75/9" (95.25/228.6 mm)
Weight approx. 12 kg (without PSU)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made
from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or shown.
8
7. APPENDIX