Behringer EURORACK PRO RX1202FX - Introduction; General Mixing Console Functions

4
EURORACK PRO RX1202FX
SPECIFICATIONS
MONO INPUTS
MIC (IMP Invisible Mic Preamp)
Type XLR, electr. balanced
Mic E.I.N. (20 Hz – 20 kHz)
@ 0 Ω source resistance -132 dB / -134 dB A-weighted
@ 50 Ω source resistance -130 dB / -132 dB A-weighted
@ 150 Ω source resistance -128 dB / -130 dB A-weighted
Frequency response <10 Hz – 200 kHz
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio -110 dB / -112 dB A-weighted
Distortion (THD+N) 0.003%, A-weighted
LINE IN
Type ¼” TRS connector,
electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB gain
STEREO INPUTS
Type ¼” TRS connector,
electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Max. input level +22 dBu
INSERT
Type ¼” TRS connector
(Tip=Send, Ring=Return)
AUXILIARY INPUTS
CD/TAPE IN
Type RCA connectors, unbalanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
AUX RETURN
Type ¼” TRS connector, balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Max. input level +22 dBu
OUTPUTS
AUX SENDS (FX)
Type ¼” TRS connector, impedance
balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
AUX SENDS (MON)
Type ¼” TRS connector, impedance
balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
MAIN OUT
Type XLR connectors, balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +28 dBu balanced
+22 dBu unbalanced
CTRL OUT
Type ¼” TRS connector, impedance
balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
CD/TAPE OUT
Type RCA connectors, unbalanced
Impedance approx. 1 kΩ
Max. output level +22 dBu
PHONES
Type ¼” TRS connector
Max. output level +19 dBu / 150 Ω (316 mW)
EQ
Low 100 Hz / ±15 dB
High 12 kHz / ±15 dB
MAIN MIX SYSTEM DATA
1
Noise
Main mix @ -oo,
Channel fader -oo -98 dB / -101 dB A-weighted
Main mix @ 0 dB,
Channel fader -oo -85 dB / -88 dB A-weighted
Main mix @ 0 dB,
Channel fader @ 0 dB -77 dB / -80 dB A-weighted
Fade attenuation
2
(Crosstalk attenuation)
Main fader closed 90 dB
Channel fader closed 90 dB
Frequency response
Microphone input to Main Out
<20 Hz – 105 kHz +1 dB / -1 dB
<10 Hz – 170 kHz +3 dB / -3 dB
EFFECTS SECTION
Converter 24-bit Sigma-Delta
Frequency rate 40 kHz
Presets 100
POWER SUPPLY
Power consumption 18 W
Voltage 100 – 240 V~, 50/60 Hz
Fuse 100 – 240 V~: T 1.6 A H 250 V
Mains connection IEC (power) cable
DIMENSIONS/WEIGHT
RX1202FX
Dimensions (H x W x D) approx. 5 1/5” x 19” x 5 9/10”
(133 mm x 482 mm x 150 mm)
Weight (net) approx. 6.4 lbs. (2.9 kg)
Measuring conditions:
1: 20 Hz – 20 kHz; measured at main output.
Channels1 – 8 gain @ unity; EQ flat; all channels on main
mix; channels 1/3/5/7 leftmost, channels 2/4/6/8 rightmost.
Reference = +6 dBu.
2: 1 kHz relative to 0 dBu; 20 Hz – 20 kHz; line input; main
output; gain @ unity.