Behringer Eurorack UB1222FX-Pro - Page 2

2 EURORACK UB1222FX-PRO Technical Specifications
EURORACK UB1222 -PRO
Ultra-Low Noise Design 16-Input 2/2-Bus Mic/Line Mixer
with Premium Mic Preampliers and Multi-FX Processor
Ultra-low noise design, highest possible headroom, ultra-transparent audio
4 state-of-the-art, studio-grade IMP “Invisible” Mic Preamps with 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
Revolutionary FBQ feedback detection system instantly reveals critical frequencies
Studio-grade stereo FX processor with 100 awesome presets including reverb, chorus, anger, delay, pitch shifter and various multi-eects
Voice canceller function on dedicated 2-track return channel for easy-to-use sing-along applications
Breathtaking XPQ 3D stereo surround eect for more vitality and enhanced stereo image
7-band stereo graphic EQ allows precise frequency correction of monitor or main mixes
4 fully equipped stereo input channels featuring 2 additional mic inputs on channels 5/6 and 7/8, 3-band EQ and trim control
Inserts on each mono channel for exible connection of outboard equipment
12 high-headroom line inputs; standby switch mutes all mic channels during breaks while background music is provided via 2-track or line inputs
2 aux sends per channel: one pre fader for monitoring and one post fader (for internal FX and/or as external send)
Switchable +48 V phantom power for condenser microphones
Balanced main mix outputs with gold-plated XLR connectors, headphone/control room and 2-track outputs
Clip-indication and set gain-level LEDs plus mute switches for each channel allow fast and accurate level setting; 2 multi-functional stereo aux returns
Rack mount brackets included
Internal switch-mode power supply for maximum exibility (100 – 240 V~), noise-free audio, superior transient response plus lowest possible power consumption for
energysaving
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Specications
Mono Inputs
Microphone Inputs (IMP “Invisible” Mic Preamp)
Type XLR, electronically balanced,
discrete input circuitry
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB / 133.5 dB A-weighted
@ 150 Ω source resistance -129 dB / 130.5 dB A-weighted
Frequency response <10 Hz - 150 kHz (-1 dB),
<10 Hz - 200 kHz (-3 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB Gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted
(0 dBu In @ +22 dB Gain)
Distortion (THD + N) 0.005% / 0.004% A-weighted
Line Input
Type ¼" TRS connector,
electronically balanced
Impedance approx. 20 kΩ balanced
approx. 10 kΩ unbalanced
Gain range -10 to +40 dB
Max. input level +22 dBu @ 0 dB Gain
Fade-Out Attenuation
1
(Crosstalk Attenuation)
Main fader closed 98 dB
Channel muted 85 dB
Channel fader muted 85 dB