Behringer MINIMIX MIX800 - Rear Panel Connectors and Information; APPLICATION EXAMPLE

8
MINIMIX MIX800
2.2 The rear
Fig. 2.2: Rear panel connectors of the MIX800
Use the 9 V jack to connect the power supply delivered with the unit.
These connectors are the unbalanced cinch outputs of the MIX800.
These connectors are the unbalanced cinch inputs of the MIX800.
SERIAL NUMBER
3. APPLICATION EXAMPLE
The wiring example shown below gives you an idea of how to use the MIX800.
Fig. 3.1: Using the MIX800
3. APPLICATION EXAMPLE