Behringer Monitor1 - MONITOR1 Control Functions; Detailed Control Descriptions

25
Quick Start Guide
(1)
MONO button sums the
left and right inputs,
sending a mono signal
to all outputs.
(2)
LEVEL knob adjusts
the output level sent to
the speakers. Set the
output on your source
audio fairly high to
achieve the least noise
possible.
(3)
MUTE button mutes
all outputs.
(4)
INPUT section accepts
balanced or unbalanced
¼" TRS or XLR cables,
or a single ⁄" stereo
cable. Do not use the
combo jacks and the
⁄" jack simultaneously.
(5)
OUTPUT section sends
audio to your listening
device via XLR cables
or a single ⁄" stereo
cable. Do not use the
XLR outputs and ⁄"
output simultaneously.
(EN) Step 2: Controls