Behringer PK108A - Page 9

16 Quick Start Guide 17PK108A/PK110A
PK108A/PK110A Controls
(1)
(2)
(3)
(5)
(6)
(8)
(9)
(4)
(7)
(12)
(10)
(11)
(1) (2) (3)
(4)
(6)
(7)
(5)
(8)
(9)
(13)
(14)
(15)
(18)
(19)
(10)
(11)
(12)
(16)
(17)
(20)
(EN)
Controls
(1) SD/MMC slot allows you to play back digital
audio les stored on SD (Secure Digital) or
MMC (MultiMedia Card) ash memory cards.
(2) LED DISPLAY shows the current le and
playback settings.
(3) USB input allows you to play back audio les
stored on a USB stick.
(4) INFRARED RECEIVER connects to the
remote control.
(5) PLAYBACK SECTION for USB and SD/MMC
oers the following playback controls:
A. MODE: Press to choose between the USB
jack or SD/MMC/BLUETOOTH as the source
for MP3 playback.
B. PLAY/PAUSE: Press to play,
pause or search.
C. REPEAT: Press to select between One,
Random, Folder or All repeat modes.
D. BACK: Press once to move to the previous
song or folder.
E. FORWARD: Press once to move to the
next song or folder.
F. LINKING: Press this button to fast-link
another PK108A or PK110A via Bluetooth
(see "Getting Started").
(6) MIC combo jack accepts audio signals from
devices using cables using XLR, balanced ¼"
TRS or unbalanced ¼" TS connectors.
(7) LEVEL knob controls the input level for the
MIC combo jack.
(8) MASTER level control adjusts the nal
speaker volume.
(9) TREBLE knob adjusts the level of treble
frequencies for the speaker unit.
(10) BASS knob adjusts the level of bass
frequencies for the speaker unit.
(11) LINE/MP3 knob controls the volume level for
the LINE IN signal and the MP3 signal.
(12) MP3/LINE switch toggles between the MP3
player or LINE IN audio sources.
(13) AUX IN connections accept unbalanced stereo
signals from external devices using audio
cables with RCA connectors.
(14) AUX OUT connections sends out an
unbalanced stereo signal to external devices
using audio cables with RCA connectors.
(15) LINE IN jack accepts audio from external
devices (MP3 players, smartphones,
tablets and so on) using cables with ⁄"
stereo connectors.
(16) PWR LED lights up when the audio system is
connected to power and switched on.
(17) CLIP LED lights up to indicate the internal
limiter is responding to signal peaks.
(18) EXTENSION OUTPUT allows you to connect
and drive an additional speaker cabinet
(min. 8  total load) using speaker cables with
professional twist-locking connectors.
(19) POWER switch turns the unit on and o.
Before turning on the audio system, all
level controls must be set to minimum.
Once the system is turned on, slowly increase input
levels to help prevent damage to the speaker
and amplier.
(20) AC INPUT socket accepts the included IEC
power cable.
Remote Control
(1) STOP button turns the Digital Media Player
on and o.
(2) MODE button switches between USB and
SD/MMC/Bluetooth as the source for playback.
(3) MUTE button mutes the sound.
(4) BACK button skips back to the previous track.
(5) FORWARD button skips ahead to the
next track.
(6) PLAY/PAUSE button starts and stops playback
of audio les.
(7) VOL- button decreases the volume
when pressed.
(8) VOL+ button increases the volume
when pressed.
(9) EQ button activates the EQ function and
chooses between EQ presets: Normal (NOR),
Pop (POP), Rock (ROC), Jazz (JAZ), Classical
(CLA) and Country (CUN). On PK108A/PK110A,
the EQ function is only accessible through the
remote control.
(10) 100+ button jumps ahead by 100 tracks.
(11) 200+ button jumps ahead by 200 tracks.
(12) NUMERIC KEYPAD allows you to enter values
for various functions.
A B C D E F