Behringer U-PHONO UFO202 - 2. System Requirements; 3. Operating Elements and Connections; L and R RCA Outputs; L and R RCA Inputs

9 U-PHONO UFO202 User Manual
2. System Requirements
◊ The UFO202 is PC and Mac-compatible.
Therefore, no installation procedure or drivers are
required for the correct functioning of the UFO202.
To work with the UFO202, your computer must fulll the
following minimumrequirements:
2.1 Hardware connection
Use the USB connecting cable supplied with the UFO202 to
connect the unit to your computer. The USB connection also
supplies the UFO202 with current. Youcan connect a variety of
devices and equipment to the inputs and outputs.
3. Operating Elements
andConnections
(1) L AND R RCA OUTPUTS: Connect an external monitoring
device, suchas a pair of monitor speakers, to the left and
right RCA outputs. (thisstep isoptional)
(2) L AND R RCA INPUTS: Connect the audio source
(recordplayer, tapeplayer,etc.) to the left and right
RCAinputs.
(3) GROUND CONNECTION: Some record players have a
separate ground cable. Ifso, attach the cable to the
ground terminal to avoid excessive noise andhum.
PC Mac
Intel or AMD CPU, 400 MHz or higher G3, 300 MHz or higher
Minimum 128 MB RAM Minimum 128 MB RAM
USB 1.1 interface USB 1.1 interface
Windows XP, 2000
Mac OS 9.0.4 or higher,
10.X or higher
(4) (3) (2) (1)
(7) (6)
(5)(8)