EasyManua.ls Logo

Behringer Ultra-Di DI600P - INPUT (1;4 TS) Connector; Unbalanced Parallel Output (1;4 TS); Balanced XLR Output; GND LIFT Switch

Behringer Ultra-Di DI600P
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ULTRA-DI DI600P
If you are using a tube amp, you must connect a speaker or a
similar load resistance to the parallel ¼" TS output.
Before connecting to a loudspeaker connector, please make
sure that the GROUND LIFT switch is in LIFT position
(no ground connection). This prevents accidental shorting of the
amp output. Besides, the tip of the input connector should be
connected to the speaker connector marked with red. The metal
casing of the DI600P should in no case have physical contact to
other equipment.
3. Specications
Frequency response 40 Hz (-3 dB) to 20 kHz
THD+N (Distortion) 0.003% @ 1 kHz,
input level +4 dBu
Input ¼" TS (unbalanced)
Level change (input output) -20 dB
Output Balanced XLR
Impedance ratio (input output) 110 : 1
INST/AMP switch 30 dB pad
Filter switch Low pass @ 7.5 kHz (-3 dB)
Dimensions (H x W x D) 1.4 x 3.75 x 5"
(35 x 95 x 128 mm)
Weight approx. 0.66 lbs (0.3 kg)
Behringer continuously strives to assure the highest quality standards possible.
Required modications may be implemented without prior notice. Technical data and the
appearance of the unit may deviate from the above values and/or illustrations.
4. Warranty
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online at
musictribe.com/warranty.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Install in accordance with the manufacturer’s instructions.
8) Only use attachments/accessories specied by the manufacturer.
9) Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been damaged in any way.
Music Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in
part upon any description, photograph, or statement contained herein. Technical specications, appearances
and other information are subject to change without notice. All trademarks are the property of their respective
owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer,
Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd.
© Music Tribe Global Brands Ltd. 2019 All rights reserved.
Zhongshan Eurotec Electronics Limited
No. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong
Province, China
Important Safety
Instructions

Other manuals for Behringer Ultra-Di DI600P

Related product manuals