Behringer ULTRADRIVE PRO DCX2496 - Output Channel (1-6) Settings; Output General Settings; Output Crossover Points and Filters

DCX.Server 2/DCX.Client 2
www.stute-engineering.de
Chapter
: Software screens
14
3.2.3 Tab “EQ/Dyn EQ”
Control the 9 channel equalizer and dynamic equalizer for the inputs and outputs.
Note: You find the details to the described DCX2496 device functions in the device manual.
1
Select a DCX2496 channel.
A,B,C: Input A,B,C
S: “Sum” channel
1..6: Output 1..6
The displayed settings and
modifications affects to the selected
channel. The “enlarged” channel
number/text indicates the currently
selected channel.
2
Switch “Equalizer” or “Dyn. Equalizer”
EQ: View and control the settings for
the equalizer
Note: “Star 6” settings are disabled
EQ Dyn: View and control the settings
for the dynamic equalizer
Note: “Star 4” EQ number is disabled
3
Switch EQ & Dyn EQ on/off
Switch the “EQ” or “EQ Dyn” on or off,
depends from star 2
4
EQ number
Note: Only enabled for EQ (see star 2)
Choose the EQ number 1..9. The
enlarged number indicates the
currently selected EQ number.
The controls from “star 5” adjusts the
selected EQ number
5
Controls for EQ & Dyn EQ
Controls for the “EQ” and “EQ Dyn”
(See “star 2”, EQ/EQ Dyn)
Change a value about the slider or the
“±” button.
6
Dynamic EQ controls
Controls only for the Dynamic Equalizer
(EQ Dyn. selected, see “star 2”)
Change a parameter about the slider
or the “±” button.