Behringer ULTRADRIVE PRO DCX2496 - Preset Storage and Management; Storing Presets to Internal Memory or Card; Deleting Presets and Formatting Cards; Copying Presets Between Banks

DCX.Server 2/DCX.Client 2
www.stute-engineering.de
Chapter
: Software screens
16
3.2.5 Tab “Limiter/Phase”
Adjust the limiter and phase settings for the output 1 to 6.
Note: You find the details to the described DCX2496 device functions in the device manual.
1
Select a DCX2496 channel.
1..6: Output 1..6
A,B,C,S are disabled
The displayed settings and changes
affects to the selected channel. The
“enlarged” channel number/text
indicates the currently selected
channel.
2
Limiter
Set the limiter parameter “Threshold”
and “Release”.
Adjust the values via the slider or “±”
buttons
The switch ”Limiter On”
enables/disables the Limiter for the
selected channel
3
Phase Out
Set phase value via the slider or “±”
buttons for the selected output
You change the polarity with the
switch “Polarity inverted” to: Off=0°
and On=180°