TIP regarding “Data” check boxes:
Under “Synchronizing,” select …
o only “Current Set” if you wish to edit just the preset currently running
o “Current Set” + “Internal Presets” if you wish to copy the contents of the
DCX2496 internal memory bank to the remote software as well
o all 3 boxes (including “Card Presets”) if you wish to dump the card presets
to your computer as well
o ATTENTION: If you checked the “Card Presets” box and the PCMCIA card
inside your DCX2496 is not formatted, you will get an error message if
you try to synchronize
- If you now wish to make parameter changes on your second or third
DCX2496, please go back to “Connect” page, select the desired device in
the left white field, click “Synchronize” (pay attention to the selected boxes)
and then “Return” to the main editor. The currently selected device name is
shown in the blue bar on top of the editor screen.
--------------------------
How to backup your DCX2496 on the PC
- Go to “Connect” Page
- (Click “? Search DCX2496s” only if the devices were not recognized
automatically)
- In the left white field, select the device you wish to backup
- Under “Synchronizing,” select:
o Direction: DCX2496->PC
o All clickable boxes (Current Set / Internal Presets / Card Presets)
- Click “Synchronize”
- “Return” to the main editor
- Go to “File” pop-up and save all 3 data file types (Set / Internal Presets /
Card Presets)
--------------------------
10
To Next Page
Loading...
