3
SPECIFICATIONS
AUDIO INPUT
Microphone
Connectors XLR
Type transformerless, DC-decoupled input
Impedance 3 k Ohms balanced
Maximum input level +10 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1 kHz
Line
Connectors XLR and 1/4" jack
Type transformerless, DC-decoupled input
Impedance 60 kOhms balanced
Maximum input level +23 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1kHz
AUDIO OUTPUT
Connectors XLR and 1/4" jack
Type electronically servo-balanced output stage
Impedance 60 Ohms balanced, 30 Ohm unbalanced
Maximum output level +21 dBu balanced and unbalanced
SYSTEM SPECIFICATIONS
Frequency response 10 Hz to 200 kHz, +/- 3 dB
Noise > 94 dBu, unweighted, 22 Hz to 22 kHz
THD 0.011 % typ. @ +4 dBu, 1 kHz, Gain 1
IMD 0.01 % typ. SMPTE
Crosstalk < -88 dB, 22 Hz to 22 kHz
FUNCTION CONTROLS
Mic gain variable (+10 dB to +60 dB)
Frequency (lo cut) variable (12 to 320 Hz)
Frequency (PEQ) variable (10 Hz to 20 kHz), dependent on x 10 and x 0.1 switch
Bandwidth variable (0.03 to 2 octaves)
Level variable (-15 dB to +15 dB)
Output variable (-20 dB to +20 dB)
FUNCTION SWITCHES
+48 V activates phantom power
Mic/line switches from line to mic preamplifier
Phase rev. phase reverse (180°)
Lo cut activates the high-pass filter
x 0.1 switches the frequency control to 10 Hz - 200 Hz
x 10 switches the frequency control to 1 kHz - 20 kHz
EQ in/out activates the parametric filter
INDICATORS
Clip clipping control LED
Output level 12-segment LED display: -30/-24/-18/-12/-6/-3/0/+3/+6/+9/+12/+18 dB
function switch LED indicator of every switch
POWER SUPPLY
Mains voltages USA/Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
General export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
Power consumption max. 20 Watts
Fuse 100 - 120 V ~: T 500 mA H
200 - 240 V ~: T 250 mA H
Mains connection standard IEC receptacle
PHYSICAL
Dimension (H * W * D) app. 1 3/4" (44.5 mm) * 19" (482.6 mm) * 8 1/2" (217 mm)
Net weight app. 3.0 kg
Shipping weight app. 4.2 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
To Next Page
Loading...
