Behringer VIRTUALIZER PRO DSP1000P - Page 15

15
E
Delay/Reverb: normal delay left, delay time can be set from 0 to 630 ms with ENG.L-EDITA in
10ms steps and feedback by ENG.L-EDITB. Right channel = reverb, with reverb time controlled by
ENG.R-EDITA and brilliance with ENG.R-EDITB.reverb right.
Pitch/Echo: Left channel a pitch shifter. ENG.L-EDITA = shift in cents, ENG.L-EDITB = semitones.
Right channel = echo effect, delay time can be set from 0 to 630 ms with ENG.R-EDITA in 10ms
steps and feedback by ENG.R-EDITB.
Flanger/Echo: Left channel a flanger, modulation freqency is controlled with VARIATION, depth with
ENG.L-EDITA and feedback with ENG.L-EDITB. Right channel = echo effect, delay time can be
set from 0 to 630 ms with ENG.R-EDITA in 10ms steps and feedback by ENG.R-EDITB.
Chorus/Echo: Left channel a chorus effect, modulation frequency is controlled with VARIATION,
modulation delay with ENG.L-EDITA and modulation depth with ENG.L-EDITB. Right channel =
echo effect, delay time can be set from 0 to 630 ms with ENG.R-EDITA in 10ms steps and
feedback by ENG.R-EDITB.
+ For an overview of all program parameters see the table in section 6.1.
1. INTRODUCTION