Behringer WASP DELUXE - Page 46

46
WASP DELUXE
*Note: If you use SysEx instead of the recommended A-440
method to turn on the Poly Chain, then the Poly Chain Device ID of
other units in the chain is not set automatically. You have to use
SysEx to set the Poly Chain ID of the rst WASP DELUXE to Device
ID=0, the second WASP DELUXE to ID=1, the third WASP DELUXE
to ID=3 and so on. All WASP DELUXE units must have the same
MIDI channel.
Retriggering Style
These examples show the dierence between the old and new
retriggering styles
Example
Old style
(v1.0.5)
New style
(v1.0.6)
Press and hold note A.
Note A is playing.
Then press and hold
note B. Note B is playing
(A stop). Release note A.
Retrigger No Retrigger
Press and hold note A. Note A
is playing. Then press and hold
note B. Note B is playing
(A stop). Release note B.
Retrigger Retrigger
Poly Chain Style
These two tables show the dierence between old and new poly
chain style.
TABLE OF NOTE RESPONSE -- Old poly chain style
Poly chain
Device
no.
How many notes are playing
0 1 2 3 4 5 6 7
1 O Note1 Note1 Note1 Note1 Note1 Note1 Note1
2 O Note1 Note2 Note2 Note2 Note2 Note2 Note2
3 O Note1 Note1 Note3 Note3 Note3 Note3 Note3
4 O Note1 Note1 Note1 Note4 Note4 Note4 Note4
5 O Note1 Note1 Note1 Note1 Note5 Note5 Note5
TABLE OF NOTE RESPONSE -- New poly chain style
Poly chain
Device
no.
How many notes are playing
0 1 2 3 4 5 6 7
1 O Note1 Note1 Note1 Note1 Note1 Note1 Note1
2 O O Note2 Note2 Note2 Note2 Note2 Note2
3 O O o Note3 Note3 Note3 Note3 Note3
4 O O O O Note4 Note4 Note4 Note4
5 O O O O O Note5 Note5 Note5
Note: Turning on the Poly Chain will aect the note
priority function
WASP DELUXE System Exclusive Commands