Behringer Xenyx QX2442USB - Page 20

20 XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual
2-Track Out
Type RCA connector
Impedance 1 kΩ
Max. output level +22 dBu
DSP
Type KLARK TEKNIK
Converter 24-bit Sigma-Delta
64/128-times oversampling
Sampling rate 40 kHz
Wireless Input
USB dongle Accepts signals from 2 independent
BehringerULM mics
Main Mix System Data (Noise)
Main mix @ -∞, -102 dB / -105 dB A-weighted
channelfader @ -∞
Main mix @ 0dB, -85 dB / -88 dB A-weighted
channelfader @ -∞
Main mix @ 0dB, -77 dB / -79 dB A-weighted
channelfader @ 0dB
Power Supply
Mains voltage 100 – 240 V~, 50/60 Hz
Power consumption 50 W
Fuse (100 - 240V~, 50/60Hz) T 1.6 A H 250 V
Mains connector Standard IEC receptacle
USB
Connector Type B
Audio Stereo in/out
Converter 16-bit
Sample rate 48 kHz
Physical/Weight
Dimensions (W x D x H) 445 x 440 x 140 mm (17.5 x 17.3 x 5.5")
Weight 5.7 kg (12.6 lbs)
QX2222USB
Microphone Inputs
XENYX Mic preamps 8
Type XLR connector, balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0Ω source resistance -134 dB / -136 dB A-weighted
@ 50Ω source resistance -131 dB / -133 dB A-weighted
@ 150Ω source resistance -129 dB / -131 dB A-weighted
Frequency response <10 Hz - 150 kHz (-1 dB)
<10 Hz - 200 kHz (-3 dB)
Gain range +10 dB to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance 2 kΩ balanced
Signal-to-noise ratio 106 dB / 108dB A-weighted
(0 dBu In @ +22 dB gain)
Distortion (THD+N) 0.005% / 0.004% A-weighted
Phantom power Switchable, +48 V
Line Input
Type ¼" TRS connector, balanced
Impedance 20 kΩ balanced, 10 kΩ unbalanced
Gain range -10 dB to +40 dB
Max. input level 30 dBu
Frequency Response (Mic In → Main Out)
<10Hz - 160kHz ±3 dB
Stereo Inputs
Type 4 x ¼" TRS connector, balanced
Impedance 20 kΩ balanced, 10 kΩ unbalanced
Gain range -20 dB to +20 dB
Max. input level +22 dBu
2-Track In
Type RCA connector
Impedance 10 kΩ
Max. input level +22 dBu
Equalizer 3-band semi-parametric
Low 80 Hz / ±15 dB
Mid Variable 100 Hz - 8 kHz / ±15 dB
High 12 kHz / ±15 dB