EasyManua.ls Logo

Behringer XM1800S - Specifications; Polar Pattern and Frequency Response; Technical Specifications

Behringer XM1800S
4 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
DYNAMIC MICROPHONE XM1800S
7. SPECIFICATIONS
Type: Dynamic
Frequency response: 80 Hz - 15 kHz
Polar pattern: Super cardioid
Impedance: 600 Ohms
Sensitivity: -52 dBV (0 dBV = 1 V/Pa), 2.5mV/Pa
Connector: 3-pin balanced XLR (male)
Dimensions:
Head length 57.5 mm
Main unit length 117.5 mm
Total length 175 mm
Weight: 230 g
The information contained in this sheet is subject to change without notice. No part of this sheet may be reproduced or transmitted
in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose,
without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER is a registered trademark. ALL RIGHTS RESERVED. © 2002 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
illustrated.
7. SPECIFICATIONS

Other manuals for Behringer XM1800S

Related product manuals