21
MULTIGATE PRO XR4400
7. SPECIFICATIONS
AUDIO INPUT
Connectors XLR and 1/4" jack
Type RF filtered, servo-balanced input
Impedance 50 kOhm balanced, 25 kOhm unbalanced
Max. Input Level +21 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1 kHz
AUDIO OUTPUT
Connectors XLR and 1/4" jack
Type Electronically servo-balanced output stage
Impedance 60 Ohms balanced, 30 Ohm unbalanced
Max. Output Level +21 dBu, +20 dBm balanced and unbalanced
SYSTEM SPECIFICATIONS
Frequency Response 18 Hz to 30 kHz, +/- 3 dB
Noise >95 dBu, unweighted, 22 Hz to 22 kHz
THD 0.008 % typ. @ +4 dBu, 1 kHz, Gain 1
IMD 0.01 % typ. SMPTE
Crosstalk <-100 dB, 22 Hz to 22 kHz
GATE SECTION
Type UTR (Ultra Transient Response) gate
Threshold variable (BYPASS to +10 dBu)
Attack program dependent
Hold variable (0 to 4 sec)
Release variable (50 ms to 4 sec)
Range variable (0 to -80 dB)
EXPANDER SECTION
Type IRC (Interactive Ratio Control) expander
Attack program dependent
Ratio variable (1:1 to 1:4)
SIDE-CHAIN FILTER
Frequency variable (100 Hz to 10 kHz)
BW (Bandwidth) variable (2.3 to 0.7 oct.)
FUNCTION SWITCHES
Monitor monitors the side-chain key signal
Filter activates the side-chain filter
Mode gate/expander switch
Couple activates the FlexLink function
INDICATORS
+ indicator signal is below threshold
Hold indicator signal reaches the threshold
- indicator signal is above threshold
Gain Reduction 8-segment LED display: 1/3/6/10/15/20/30/40 dB
LED indicator for each function switch
POWER SUPPLY
Mains Voltages USA/Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
General Export Model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
Power Consumption max. 20 Watts
Fuse 100 - 120 V ~: T 630 mA H
200 - 240 V ~: T 315 mA H
Mains Connection Standard IEC receptacle
PHYSICAL
Dimension 1 ¾" (44.5 mm) * 19" (482.6 mm) * 8 ½" (217 mm)
Net Weight approx. 2.5 kg
Shipping Weight approx. 3.5 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
shown.
7. SPECIFICATIONS
To Next Page
Loading...
