Safety Precautions
• All devices have to be supplied by a Class 2 power supply.
Warning:
Donotd isconnectequipmentunlesspowerhasbeenremovedortheareais
knowntobenon-hazardous
• For Canada also AVERTISSEMENT – AVANT DE DECONNECTER
L’EQUIPEMENT, COUPER LE COURANT OUS’ASSURER QUE
L‘EMPLACEMENT EST DESIGNE NON DANGE REUX.
Warning:
OnlyULandcULapprovedexpansionunitsareallowedtobeconnectedto
theportdesignated“EXPANSION”. Atthemomenttherearenosuchunits
evaluatedorallowed.
Warning:
Donotreplaceexpansionunitunlesspowerhasb eenswitch
edofforthearea
isknowntobenon-hazardous.
• This product contains a battery; this must only be changed in an area known
to be non-hazardous.
• Replace the battery with a BR 2032 battery. Use of another type o f batter y
may present a risk of fire or explosion .
Warning:
Batterymayexplodeifmistreated. Donotrecharge,disassembleordispose
ofinfire.
• For use on a flat surface of a type 4X enclosure indoor use only.
• Use 7 5 degree conductors only
• Use copper conductors only
• To make wiring connections to the power supply connector, follow the table
with cable and torque specifications below:
TerminalBlockNo. WireSizeAWG TQLb.In.
X1/X100Phoenixconnectors AWG30–12 5–7
X1/X100Anyt ekconnectors AWG24–12 3.5
• These de
vicesareClass2suppliedprogrammablecontrollers(industrialPCs)
for the
use in industrial control equipment and are intended to be (front)
panel m
ounted (Type 1 and 4x for indoor use only).
BeijerElectronics, MAEN017F
5
To Next Page
