To Next PageTo Next Page
Need help?Do you have a question about the Beissbarth Servomat MS 50 and is the answer not in the manual?
General| Brand | Beissbarth |
|---|---|
| Model | Servomat MS 50 |
| Category | Power Tool |
| Language | English |
Physical measurements of the machine including height, depth, and width.
Specifies the net and gross weight of the machine.
Details on motor power, phases, voltage, and bead breaker force.
Operating pressure requirements for the pneumatic system.
Specifies the noise level emitted by the machine.
Outlines the wheel and rim sizes the machine can handle.
Information found on the machine's identification plate.
Description of the machine's control pedals.
Explanation of the bead-breaking device and its components.
Details on the column unit, including sliding arm and tool head.
Description of the device for locking and rotating the rim.
Tool for lifting tyre bead during mounting/demounting operations.
Ring to hold lubrication tin for tyre mounting operations.
Attention to safety signs applied to the machine.
Unit for air filtering, pressure reduction, and lubrication.
Special protectors for working on light alloy rims.
Optional gun with manometer for inflating tyres.
Recommended for safe tyre inflation operations.
Instructions for removing packaging and checking machine integrity.
Guidelines for positioning the machine and safety distances.
Information on securing the machine to prevent vibrations.
Prohibition of placing the machine in explosive environments.
Steps for removing the machine's side cover.
Procedure for safely lifting the machine's column.
Instructions for securing the machine column.
Steps for correctly positioning the vertical arm.
Instructions for final placement and securing of the machine.
Instructions for connecting the pneumatic system components.
Safety and connection procedures for the electrical system.
Verifying the correct operation of the machine's primary functions.
Lists common machine malfunctions, their causes, and possible solutions.
Initial steps before operating the machine, like deflating tyres.
Step-by-step guide for breaking tyre beads from the rim.
Procedure for removing the tyre from the rim.
Steps for mounting tyres onto the rim.
Procedures and safety measures for tyre inflation.
Explanation of built-in safety features for inflation.
Emphasizes the importance of safety belts during inflation.
Specific installation steps for the MS 63 IT model.
Guidance for using the MS 63 IT model, including tubeless inflation.
Legend for components and controls specific to the MS 63 IT model.
Explanation of the safety features for tubeless tyre inflation.
Warning regarding the use of safety belts during inflation.
Additional installation steps for the MS 63 IT model.
Further guidance on using the MS 63 IT model, including tyre bead seating.
Legend for controls and components of the MS 63 IT model.
Installation instructions for the MS 63 ITE model.
Guidance for using the MS 63 ITE model, especially its automatic inflation features.
Legend for controls and components of the MS 63 ITE.
Explanation of the safety device for automatic inflation.
Warning about using safety belts during inflation.
General installation guidance for the MS 65 model.
Usage instructions for the MS 65 model, including special features for wide rims.
Legend for controls and components of the MS 65 model.
How to connect the manometer to the power supply.
Procedures for setting desired pressures in normal and IT cycles.
Specific steps for using the IT (tubeless) inflation cycle.
How to operate the manometer in manual mode.
Instructions for displaying and setting values in PSI.
How to adjust overpressure settings for different tyres/rims.
General cleaning and maintenance procedures for the user.
Specific maintenance tasks for mechanical components.
Checking and maintaining the oil level in the lubricator.
Procedure for draining condensation from the air filter.
Instructions for checking, cleaning, and lubricating the roller.
Checking the tension and condition of the motor drive belt.
Periodic checks of the inflation manometer readings.
Precautions for moving or transporting the machine.
Procedures for temporary storage and final scrapping of the machine.
Actions to take when the machine is not in use.
Steps for long-term storage or decommissioning.
Guidelines for disposing of the machine as special waste.
Advice to consult troubleshooting section for machine malfunctions.
Guidance on contacting the authorized retailer for service.
Warning about qualified personnel for electrical, hydraulic, and pneumatic systems.
Instruction to purchase spare parts exclusively from authorized retailers.
List of part numbers for the SERVOMAT MS 50-52-63-65 models.
Diagram showing the assembly of the optional FR+L pneumatic group.
Specifies the guarantee period and required documentation.
Details what is covered and excluded under the guarantee.
Manufacturer's liability and conditions for repairs.
Information on transport costs and guarantee for replaced parts.
Declares conformity of the product with applicable EU directives and standards.
Details about the manufacturer, Beissbarth Automotive Group.
