Need help?Do you have a question about the Beko BEKOMAT 13 and is the answer not in the manual?
General| Voltage | 230 V AC |
|---|---|
| Protection class | IP65 |
| Category | Control Unit |
| Operating pressure | 0 - 16 bar |
| Operating temperature | 0 - 60 °C |
| Housing material | Aluminum |
Provides manufacturer and customer service contact information for BEKO TECHNOLOGIES GmbH.
Details copyright protection and guidelines for handling the installation and operation manual.
Lists related documentation providing more detailed information on the product.
Defines the intended use of the BEKOMAT® and outlines reasonably foreseeable inappropriate uses.
Outlines the responsibilities of the operating company for ensuring safe operation and environmental protection.
Identifies specific personnel qualifications required for transport, compressed gas, and electrical tasks.
Lists and explains all safety-relevant and important symbols used within the manual.
Explains the structure of safety instructions, including signal words and their meanings.
Describes the BEKOMAT® as an electronically level-controlled condensate drain for compressed gas systems.
Illustrates the BEKOMAT® components and provides a list of their descriptions and order references.
Explains how condensate is collected, monitored by a sensor, and discharged via a solenoid valve.
Details the information and operating parameters found on the product's type plate.
Lists the items included in the standard delivery package for the BEKOMAT®.
Lists key operational parameters such as pressure, temperature, voltage, and power consumption.
Specifies the temperature ranges and conditions for storing and transporting the BEKOMAT®.
Identifies the materials used for the housing and membrane of the BEKOMAT® units.
Details performance data, including compressor, dryer, and filter capacities, influenced by climatic zones.
Provides physical dimensions for BM 13, BM13 CO, and BM13 CO PN25/PN40 models.
Specifies the required space and clearances for installing the BEKOMAT® unit.
Presents wiring diagrams for the power control board (AC/DC) and the control PCB.
Provides guidelines for safely transporting the packaged BEKOMAT® product.
Outlines recommended conditions for storing the BEKOMAT® to maintain its integrity.
Highlights critical safety warnings and precautions that must be observed during assembly.
Illustrates correct versus incorrect assembly practices for optimal BEKOMAT® installation.
Details the step-by-step assembly process for BEKOMAT® BM13 and BM13 CO models.
Provides specific assembly instructions for the BEKOMAT® BM13 CO PN63 model.
Lists essential safety warnings related to electrical voltage and component handling.
Covers prerequisites and general tasks for all electrical connection procedures.
Details how to connect AC and DC voltage supplies to the power control board.
Explains the procedure for connecting the potential-free contact for fault signaling.
Describes how to connect an external TEST button for remote condensate discharge control.
Provides critical safety warnings and prerequisites before commencing commissioning tasks.
Outlines the sequence of steps for bringing the BEKOMAT® unit into operation.
Explains the LED indicators and their meanings for various operating states and self-tests.
Highlights safety warnings related to pressure, cleaning media, and personnel qualifications for maintenance.
Specifies the recommended intervals for essential maintenance tasks like cleaning and inspections.
Covers general prerequisites and tools needed for performing maintenance procedures.
Provides a detailed, step-by-step guide for replacing wear parts in the BEKOMAT®.
Details the correct procedures and tools for cleaning various components of the BEKOMAT®.
Describes how to conduct visual checks for mechanical damage and corrosion.
Explains the purpose and general methodology of performing a leakage test.
Lists the necessary data required when inquiring about or ordering accessories and spare parts.
Presents available accessories for the BEKOMAT® with their descriptions and order references.
Illustrates and lists various spare parts, including wear parts, membranes, and seals.
Provides safety warnings concerning pressure build-up and electrical voltage during decommissioning.
Details the steps required to safely disconnect and decommission the BEKOMAT® unit.
Highlights warnings against inappropriate disposal and provides guidance on environmental protection.
Outlines procedures for the proper disposal of the BEKOMAT® at the end of its service life.
Explains various certification markings such as CE, FCC, cTÜVus, EAC, and WEEE.
Provides an exploded diagram detailing all components of the BM13 and BM13 CO models.
Offers an exploded diagram of the components for BM13 CO PN25 and BM13 CO PN40 models.
To Next Page
