How to troubleshoot a Beko Dishwasher that doesn't start?
If your Beko Dishwasher doesn't start, several factors could be at play. First, ensure the power cable is securely plugged in. Next, check the fuses in your house to see if any have blown. Also, verify that the water inlet tap is open, the dishwasher door is fully closed, and that you've pressed the On/Off button to turn the machine on.
Why aren't my dishes getting clean in my Beko DFN28330WAD?
If dishes aren't getting clean in your Beko Dishwasher, several issues could be the cause. Make sure dishes are loaded properly, as described in the user manual. Select a programme with a higher temperature and cycle time. Check that the impellers rotate freely and aren't blocked by food remnants. Clean the filter system regularly and ensure it's installed correctly. Avoid overloading the baskets. Store powder detergent in a closed container in a dry place, or use tablet detergents. Adjust the amount of detergent according to how dirty your dishes are, and check and refill the rinse aid if needed. Also, ensure the detergent dispenser lid is closed tightly.
How to remove lime traces from dishes in Beko DFN28330WAD?
If lime traces are appearing on your dishes and glassware looks misty after washing in your Beko Dishwasher, it could be due to a few reasons. Check the rinse aid indicator and add rinse aid if necessary, or increase the rinse aid setting. Measure the hardness of your water supply and check the water hardness setting on your dishwasher. Also, be careful not to spill salt when filling the salt reservoir, ensure the lid is tightly closed afterward, and run a prewash cycle to remove any spilled salt.
Why does detergent remain in the dispenser of my Beko DFN28330WAD Dishwasher?
If detergent is left in the dispenser after a cycle in your Beko Dishwasher, ensure the dispenser is dry before adding detergent and add detergent just before starting the wash. Position dishes so they don't block the dispenser lid from opening or water from the impellers from entering. Store powder detergent in a closed container in a dry place, or use tablet detergents. Check impellers and clean them regularly.
How to get rid of bad smell in Beko DFN28330WAD Dishwasher?
If there's an unusual odor coming from your Beko Dishwasher, check if the filter system is clean and clean it regularly. If you're not running the dishwasher immediately after loading, remove food remnants and run the prewash programme without detergent every two days. Leave the door slightly open to prevent odor buildup. You can also use commercial odor removers or machine cleaners.
What to do if tea stains remain on dishes in Beko DFN28330WAD?
If tea, coffee, or lipstick stains persist on dishes after washing in your Beko Dishwasher, try selecting a programme with a higher temperature and longer cycle time. Note that stains may not be cleaned from deteriorated surfaces, and it is not recommended to wash such items in the dishwasher. If using powder detergent, store it in a closed container in a dry place or use tablet detergents.
Why is there rust on dishes in my Beko Dishwasher?
If rust, discoloration, or surface deterioration appears on dishes in your Beko Dishwasher, ensure you're not spilling salt when filling the reservoir and that the lid is tightly closed. Run a prewash cycle to remove any spilled salt. Remove salty food remnants before loading or prewash dishes. Check that the dishwasher is connected to a grounded electrical line. Avoid using intensive cleansers like bleach. Don't use metal items for unintended purposes. Note that low-quality stainless steel cutlery and already corroded items should not be washed in the dishwasher.
General| Type | Freestanding |
|---|---|
| Capacity | 13 place settings |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Display Type | LED |
| Delay Start | Yes |
| Half Load | Yes |
| Child Lock | Yes |
| Cutlery Basket Type | Basket |
| Size | Full-size |
To Next Page
