Need help?Do you have a question about the Belden Lumberg Automation 0930 DSL 700 and is the answer not in the manual?
General| Brand | Belden |
|---|---|
| Model | Lumberg Automation 0930 DSL 700 |
| Category | I/O Systems |
| Language | English |
Explains symbols, notes, and hazard notes used throughout the manual for clarity.
Covers certified usage and general safety principles for the LioN-M modules.
Defines the necessary qualifications and expertise for personnel installing or servicing the devices.
Details mounting methods, screw types, torque, and essential grounding procedures for stability.
Describes the pin configuration for the 7/8" male/female connector for bus and system supply.
Details the pinout for the M12 female connector used for sensor and actuator connections.
Explains the pin configuration for the 7/8" male/female connector for system/sensor/actuator supply.
Explains how to set the DeviceNet address using rotary switches and network software.
Details the data transmission rates and auto-baud detection mechanism for module communication.
Describes the bit layout for input and output data bytes, including diagnostic information.
Lists the communication modes supported by the LioN-M modules.
Explains the meaning of LED indicators for module status and diagnostic information.
Provides general specifications including protection degree, temperature, weight, and housing material.
Details technical specifications related to the DeviceNet bus system, protocol, and module adjustment.
Lists technical data for the power supply of the module's electronics, including voltage and protection.
Specifies technical data for the sensor power supply, including voltage, current, and indication.
Details technical data for the actuator power supply, including voltage, consumption, and protection.
Specifies technical data for the digital inputs, including voltage, current, channels, and indication.
Lists technical data for the digital outputs, including current, signal levels, and overload protection.
To Next Page
