5
Setting Up: Basics
Where to find more help
In addition to this user guide, you can find help at Belkin.com/support/RT1800(documentation,
downloads, FAQs, technical support, live chat, forums)
Note—Licenses and notices for third party software used in this product may be viewed on
https://www.belkin.com/support/license/
. Please contact
https://www.belkin.com/support/gplcodecenter/ for questions or GPL source code requests.
How to install your router
Adding this router to your existing mesh Wi-Fi?
If you have used this router before, reset it to factory default settings before adding it to your mesh
Wi-Fi. You can do this in the Administration tab of the router’s settings or by pressing and holding for
10 seconds the reset button on the back of the router.
• Using a computer or mobile device, connect to your parent router (the one connected to your
modem) wirelessly or with an ethernet cable
• Visit myrouter.local in a web browser
o You also can enter 192.168.1.1 in a browser to start setup. If you are using a modem-
router (gateway), you might need to enter 192.168.10.1.
Note—If none of those options take you to the setup wizard, go to
www.belkin.com/support/setupIP for more help.
• Log in to the router with the router password. (Default is “admin”)
• Go to Wi-Fi > Basic Wireless Setings and click on Add a new node
To Next Page
Loading...
