37
USING YOUR ROUTER
Enabling Auto Update on Your Belkin Router
The Router has the capability to automatically check for a newer
version of firmware and alert you when it’s available. You can choose
to download the new version or ignore it. Auto Update is disabled by
default. If you want to enable it, select “Enable” and click “Save”.
Note: We recommend you use a computer that
has a wired connection to the Router.
Setup steps:
1. Open a web browser on the computer.
2. In the address bar of the web browser, type “http://192.168.2.1”.
3. Click on “System Settings” in the Router
Links section on the dashboard.
To Next Page
Loading...
