Belkin Wireless G Plus MIMO Router F5D9230-4 - Reset Button Functionality

13
Knowing your Router
section
1
9
2
3
4
5
6
7
8
10
I. Reset Button
The “Reset” button is used in rare cases when the Router may function
improperly. Resetting the Router will restore the Router’s normal
operation while maintaining the programmed settings. You can also
restore the factory default settings by using the “Reset” button. Use
the restore option in instances where you may have forgotten your
custom password.
(a) Resetting the Router
Push and release the “Reset” button. The lights on the Router will
momentarily flash. The “Power/Ready” light will begin to blink. When
the “Power/Ready” light becomes solid again, the reset is complete.
(b) Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds,
then release it. The lights on the Router will momentarily
flash. The “Power/Ready” light will begin to blink. When
the “Power/Ready” light becomes solid again, the restore
is complete.
J. Push Button – White
This button is used for the Wi-Fi Protected Setup
TM
feature. Please refer
to the “Changing the Wireless Security Settings” section.