Belkin Wireless G Plus MIMO Router F5D9230-4 - Step 2: Setup Assistant Software Installation

16
Connecting and Configuring your Router
Step 2
Set Up the Router – Run the Setup Assistant Software
2.1
Shut down any programs that are running on your computer at this
time.
Turn off any firewall or Internet-connection-sharing software
on your computer.
2.2
Insert the CD into your computer. The Setup Assistant will
automatically appear on your computer’s screen within 15 seconds.
Click on “Go” to run the Setup Assistant. Follow the instructions there.
IMPORTANT:
Run the Setup Assistant from the computer that is directly
connected to the Router from Step 1.2.
Note
for Windows Users:
If the Setup Assistant does not start up automatically,
double-click on the “My Computer” icon on your desktop, select your CD-ROM drive,
and double-click on the file named “SetupAssistant”.