Belkin Wireless G Plus MIMO Router F5D9230-4 - Setting to Point-To-Point Tunneling Protocol

40
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European Countries Only]
Some ISPs require a connection using PPTP protocol, a type of connection most
common in European countries. This sets up a direct connection to the ISP’s system.
Type in the information provided by your ISP in the space provided. When you have
finished, click “Apply Changes”. After you apply the changes, the Internet Status
indicator will read “connection OK” if your Router is set up properly.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
1. PPTP Account
Provided by your ISP. Enter your PPTP account name here.
2. PPTP Password
Type in your password and retype it into the “Retype Password” box to
confirm it.
3. Host Name
Provided by your ISP. Enter your host name here
4. Server IP Address
Provided by your ISP. Enter your server IP address here.
5. My IP Address
Provided by your ISP. Enter the IP address here
6. My Subnet Mask
Provided by your ISP. Enter the IP address here.