Belkin Wireless G Plus MIMO Router F5D9230-4 - Setting WEP Encryption

58
Using the Web-Based Advanced User Interface
Setting WEP Encryption
Note to Mac users
: The “Passphrase” option will not operate with Apple
®
AirPort
®
.
To configure encryption for your Mac computer, set the encryption using the manual
method described in the next section.
1.
Select “128-bit WEP” or “64-bit WEP” from the drop-down menu
2.
After selecting your WEP encryption mode, you can enter you WEP
2. After selecting your WEP encryption mode, you can enter you WEP 2.
key manually by typing in the hex WEP key manually, or you can type a
passphrase in the “PassPhrase” field and click “Generate” to create a WEP
key from the passphrase. Click “Apply Changes” to finish. You must now set
all of your clients to match these settings.
3.
Encryption in the Router is now set. Each of your computers on your
wireless network will now need to be configured with the same passphrase.
Refer to the documentation of your wireless network adapter for information
on making this change.