Belkin Wireless G Plus MIMO Router F5D9230-4 - Setting up the Router’s Dynamic DNS Update Client

68
Using the Web-Based Advanced User Interface
Setting up the Router’s Dynamic DNS Update Client
You must register with DynDNS.org’s free update service before using this feature.
Once you have your registration, follow the directions below.
1.
Enter your DynDNS.org user name in the “User Name” field
(1)
.
2.
Enter your DynDNS.org password in the “Password” field
(2)
.
3.
Enter the DynDNS.org domain name you set up with DynDNS.org in the
“Domain Name” field
(3)
.
4.
Click “Update Dynamic DNS” to update your IP address.
Whenever your IP address assigned by your ISP changes, the Router will
automatically update DynDNS.org’s servers with your new IP address. You can also
do this manually by clicking the “Update Dynamic DNS” button
(4)
.
(1)
(2)
(3)
(4)