Using the Web-Based Advanced User Interface
A 60-second countdown will appear on the screen. When the countdown
4. A 60-second countdown will appear on the screen. When the countdown 4.
reaches zero, the Router’s defaults will be restored. The Router home page
should appear automatically. If it does not, type in the Router’s address
(default = 192.168.2.1) into the navigation bar of your browser.
Saving a Current Configuration
You can save your current configuration by using this feature. Saving your
configuration will allow you to restore it later if your settings are lost or changed. It
is recommended that you back up your current configuration before performing a
To Next Page
Loading...
