Step 2 Set up your Computer’s Network Settings to Work
with a DHCP Server
See the section in this User Manual called “Manually Configuring Network
Settings” for directions.
Step 3 Configure the Router Using the Web-Based
Advanced User Interface
Using your Internet browser, you can access the Router’s Web-Based
Advanced User Interface. In your browser, type “192.168.2.1” (you do not
need to type in anything else such as “http://” or “www”). Then press the
“Enter” key.
PLEASE NOTE: If you have difficulty accessing the Router’s
Web-Based Advanced User Interface, go to the section entitled “Manually
Configuring Network Settings”.
Logging into the Router
You will see the Router’s home page in your browser window. The home
page is visible to any user who wants to see it. To make any changes to
the Router’s settings, you have to log in. Clicking the “Login” button or
clicking on any one of the links on the home page will take you to the login
screen. The Router ships with no password entered. In the login screen,
leave the password blank and click the “Submit” button to log in.
To Next Page
Loading...
