Step 4 Configure your Router for Connection to your Internet
Service Provider (ISP)
The “Internet/WAN” tab is where you will set up your Router to connect to
your Internet Service Provider (ISP). The Router is capable of connecting
to virtually any ISP’s system provided you have correctly configured the
Router’s settings for your ISP’s connection type. Your ISP connection
settings are provided to you by your ISP. To configure the Router with the
settings that your ISP gave you, click “Connection Type” (A) on the left
side of the screen. Select the connection type you use. If your ISP gave
you DNS settings, clicking “DNS” (B) allows you to enter DNS address
entries for ISPs that require specific settings. Clicking “MAC address” (C)
will let you clone your computer’s MAC address or type in a specific WAN
MAC address, if required by your ISP. When you have finished making
settings, the “Internet Status” indicator will read “connection OK” if your
Router is set up properly.
(A)
(B)
(C)
To Next Page
Loading...
