TB 212-11-211
Page 2 of 8
ECCN EAR99
MANPOWER:
Approximately 3.0 man-hours are required to complete this bulletin. This estimate is
based on hands-on time, and may vary with personnel and facilities available.
WARRANTY:
There is no warranty credit applicable for parts or labor associated with this bulletin.
MATERIAL:
Required Material:
The following material is required for the accomplishment of this bulletin and may be
obtained through your Bell Helicopter Textron Supply Center.
Part Number Nomenclature Qty
412-060-024-101 Snubber Assembly 1
212-060-700-131 Spacer 1
212-060-700-133 Spacer 2
MS27039-1-21 Screw 3
NAS1149C0316R Washer 3
Consumable Material:
The following material is required to accomplish this bulletin, but may not require
ordering, depending on the operator’s consumable material stock levels. This material
may be obtained through your Bell Helicopter Textron Supply Center.
Part Number Nomenclature Qty Reference *
AMS3276 1 pt Sealant 1 C-599
299-947-152, TY III Adhesive 1 C-314
P-P-101 Abrasive 400 grit 1 C-423
MILC81706 CL1AFORM11 Alodine 1200 1 C-100
513X395/910X710 Primer 1 C-204
* C-XXX numbers refer to the consumables list in BHT-ALL-SPM Standard Practices Manual
SPECIAL TOOLS:
None required
To Next Page
Loading...
