Features
Operating Instructions
• Ensure that the slow cooker is on a dry, flat surface.
• Ensure that the control knob is in the OFF position.
• Plug in the power cord in the power supply.
• Remove the ceramic bowl from the base unit simply by lifting it
out of the base unit.
• Prepare the food and place into the ceramic bowl.
WARNING: Do not overfill the ceramic bowl. Ensure
the ceramic bowl is filled no more then 2/3 full.
• Once completed preparing the food, place the ceramic bowl in
the base unit.
• Ensure the lid is on the slow cooker.
• Choose a desired setting from the three settings indicated
below:
1. Low Setting – Lowest Temperature
2. High Setting – Highest Temperature
3. Auto Setting – Starts cooking on HIGH then
switches to LOW once the correct temperature is
reached.
• Turn the control knob to the desired setting, simply by turning
it.
• The power light will illuminate and the slow cooker will begin
cooking.
WARNING: The base unit should NOT be switched on
without the ceramic bowl in position
• When cooking is complete, switch the control knob to the
“OFF” position.
• Ensure you UNPLUG the power cord from the power supply.
To Next Page
Loading...