Bellman BE1350 - Getting Started; Connect Bed Shaker; Connect Power Supply; Position Bed Shaker

Getting started
1 Connect the bed shaker on the back of the alarm clock.
2 Connect the power supply to the alarm clock and the mains
outlet to turn it on.
3 Tuck the bed shaker under the pillow or mattress and place the
alarm clock on the bedside table.
Setting the time
Press the left dial and turn it to set hours.
To set minutes, press and turn the dial again.
Press once again to save your settings.
Setting the alarm
Press the right dial and turn it to set hours.
To set minutes, press and turn the dial again.
Press once again to save your settings.
Using the snooze
Press the snooze button briey to snooze the alarm.
The snooze time interval will automatically decrease
from 9 to 2 minutes in 2 minute steps.
Activating the alarm
Press the alarm on/o button to activate the alarm.
The alarm symbol appears on the clock face.
To turn o the alarm, press the button again.
1
2
The appearance may
dier with territory
Alarm clock Classic