INSTALLATION
CAUTION:
HAZARDOUS VOLTAGE. Contact with energized components will result
in electric shock. Use only for insects. Do not use water, liquids or sprays to clean.
Keep your hands/fingers away from the zapper grid.
WARNING: NOT A TOY. KEEP AWAY FROM CHILDREN.
PLEASE READ THIS MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE USE.
• DO NOT use the Monster Solar Zapper in high traffic areas, if installing in the ground.
• When picking a place to install your Monster Solar Zapper, CHOOSE A LOCATION WITH
MAXIMUM SUN EXPOSURE DURING THE DAY.
• Do not use the Solar Zapper to force the stake into the ground. First, insert the stake
into the ground and then place floodlight over the stake.
• Avoid areas under trees or bushes as this will prevent a proper charge of the
Solar Zapper
.
• Do not install Solar Zapper near an existing outdoor light. The built-in sensor
will prevent it from turning the flood lights on.
PARTS & FEATURES
Package includes:
Monster Solar Zapper, 2 screws, 2 plastic anchors,
1 mounting plate,1 ground spike, 1 stake.
1
Choose a location with
maximum sun exposure.
Drill holes matching the
pattern on the Mounting
Plate and install plastic
anchors (included).
Attach the Mounting Plate
using 2 screws (included).
Align the mounting holes
on the back of the Solar
Zapper
with the hooks
on
the Mounting Plate.
Secure the unit.
2
5
MOUNTING FLOODLIGHT
6
FOR IN-GROUND INSTALLATION
Insert Ground
Spike into
the Stake.
1
Make sure the
soil is softened.
Insert Stake
into the
ground.
2
Insert Solar Zapper
over the Stake.
3
9
10
1
4
INSTRUCTIONS
7
8
3
1. Adjustable Solar Panel
2. Mounting Holes
3. Mounting Plate
4. 24 LED lights
5. Motion Sensor
6. ON/OFF Switch
7. Zapper Grid
8. 8 pcs UV 395nm
9. Ground spike
10. Stake
2 2
MOUNTING HOLES
BACK OF UNIT
• When using the
Solar Zapper
in the fall, please note that due to fewer daylight
hours,
the batteries might not charge fully. This may affect the amount of time the Solar
Zapper will be on.
• In case of heavy rain, we recommend to swivel each arm downwards to protect
the zapper grid and avoid any damage to the unit. Do not touch the zapper grid.
To Next Page
Need help?
General