BEMMA Terra - Insert Vanity Drawer; Extend Drawer Glides; Engage Drawer to Back Hook; Seat Drawer Box on Peg

STEP 5
Inserting Drawer (if required)
1. Pull drawer glides all the way out
2. Locate the 3 holes on the drawer box
3. Insert the drawer box into the back hook
4. Gently place drawer box onto the peg
5. Push in the bottom of the lock which is located at the bottom
of the drawer
6. Adjust the slides as seen in step 3 (if needed)
ASSEMBLY INSTRUCTIONS
3
2
1