Need help?Do you have a question about the Benchmark Scientific Incu-Shaker Mini and is the answer not in the manual?
General| Temperature Range | Ambient +5°C to 70°C |
|---|---|
| Speed Range | 30 to 300 rpm |
| Orbit Diameter | 19 mm |
| Weight | 13 lbs (5.9 kg) |
| Power Supply | 230V |
| Electrical | 115V, 60Hz |
| Timer | 1 minute to 99 hours 59 minutes or continuous |
Guidelines for safe use and handling of the power cable, including spacing and plug usage.
Safety measures for operating the instrument, avoiding disassembly and flammable substances.
Key features of the Incu-Shaker Mini, including drive system, user interface, and construction.
Technical specifications such as dimensions, temperature range, speed, timer, and power requirements.
Procedure for powering on the instrument and its initial boot sequence.
Explanation of the main display screen elements and basic controls.
How to adjust the temperature setting on the basic screen.
How to adjust the shaking speed (RPM) on the basic screen.
How to adjust the timer setting on the basic screen.
Instrument behavior and display messages when the set time expires.
Instructions for switching between the basic and advanced operational views.
Step-by-step guide for calibrating the instrument's temperature sensor.
How to modify temperature settings using the advanced display interface.
Setting the timer for temperature control in advanced mode.
Configuring alarm thresholds for temperature deviations.
Adjusting the shaking speed (RPM) using the advanced screen.
Setting the timer for the shaking function in advanced mode.
Configuring alarm thresholds for shaking speed deviations.
Instructions on how to disable or toggle the audible alarm.
Procedure for programming multi-step temperature profiles.
Procedure for programming multi-step shaking speeds and times.
Display information and behavior when a step cycle concludes.
Locating and replacing the instrument's fuse.
Display of the 'Door' message when the instrument door is open.
Display of 'low' or 'high' messages for temperature or shaker deviations.
Instructions for cleaning the instrument and handling spills.
Details for obtaining service, technical support, and contact information.
To Next Page
