14
MACHINE SAFETY
Your lawn mower has been designed in accordance with specic safety standards.
Safety systems operate as follows:
Prevent engine start unless all machine’s safety conditions are in place.
Conditions to be compiled with :
1. Start switch end position.
2. Parking brake engaged.
3. Cutting blade disengaged.
▪ In case even one safety condition lacks, stop engine.
The engine stops if:
1. The operator leaves the driving seat with blade rotation enabled.
2. The grass bag is lifted without having disengaged blade rotation.
3. Blade rotation is engaged without the bag having been properly installed.
Never tamper with the safety switches and their power leads. In
case of a fault, do not use the machine but contact an authorized service center.
Danger if protective devices are removed or manipulated! Do not
operate with any protective devices removed or manipulated. Defective protective
devices must be repaired or renewed immediately!
Above all, the protective devices include:
1. Brake contact switch.
2. Mower mechanism contact switch.
3. Grass catcher contact switch.
4. Seat contact switch.
5. Mower mechanism covers.
6. Belt covers.
Dangers due to overloading the ride-on mower! Make sure that the
permissible inclines/declines are not exceeded. Exceeding these values may exceed
the braking capacity of the ride-on mower and lead to dangerous situations!
Bear in mind that the ride-on mower is not approved for road use, and thus is not
allowed to be driven on public roads.
To Next Page
Loading...
Need help?
General
