33
BLADE DECK UP DOWN LEVER (Part 16)
Lifts or lowers the blade deck and thereby adjusts the grass cutting height.
There are four possible height adjustments. Press the handle on the lever and
accompany the lever to the required position. When the button is released, the lever
remains in the selective selected position. Cutting heights: see technical data table.
Lower Cutting Height Settings has more potential for scalping
especially on uneven terrains.
BLADE ROTATION ENGAGEMENT LEVER (Part 17)
▪ Starts or stops blade rotation.
▪ Blade engaged.
▪ Blade disengaged.
If the lever is engaged without observing safety conditions, the engine switches off if
it is running, or else cannot be started.
See chapter Machine Safety.
SAFETY RECOMMENDATIONS
The machine must only be used for the purpose for which it was
designed (cutting grass). Do not tamper with or remove the safety devices fitted on
the machine.
REMEMBER THAT THE USER IS ALWAYS RESPONSIBLE FOR DAMAGE AND INJURY
TO OTHERS. Before using the machine：
1. Read the general safety regulations, paying particular attention to driving and
cutting slopes.
2. Carefully read the instructions for use. Make sure you are familiar with the
controls and know how to stop the blades and the engine quickly.
3. Never put your hands or feet next to or beneath the rotating parts and always
keep away from the exit.
4. Do not use the machine when in a precarious state of health or under the effect of
medicine or any other substances that can reduce your reflex actions and your
ability to concentrate. It is the user's responsibility to assess the potential risk of
the area where work is to be carried out, and to take all the necessary precautions
to ensure his own safety and that of others, particularly on slopes or rough,
slippery, and unstable ground.
To Next Page
Loading...
Need help?
General
