EasyManuals Logo

Benchmark BCT24M User Manual

Benchmark BCT24M
99 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
42
4. Switch off the engine and unplug the spark plug cap. Remove the key.
5. Release the bag.
6. Remove the accumulated grass from the rear part of the bag.
END OF MOWING
When you have nished mowing:
1. Operate the parking brake.
2. Disengage blade rotation.
3. Lift the blade deck as far as it will go.
4. Drive the machine to your destination.
Always remove the Ignition Key (13) before leaving the machine
unattended! To keep the battery charged, do not leave the Ignition Key (13) in the ON
position when the engine is not running.
CLEANING THE MACHINE
MACHINE
Do not use high pressure nozzles or aggressive liquids to wash the casing and the
engine.
ENGINE
Periodically clean the air filter (Fig 48-49) and check the ignition plug electrodes
(Fig 50-51).
At the start of each season, check the machine and have it serviced by a specialized
after-sales center.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benchmark BCT24M and is the answer not in the manual?

Benchmark BCT24M Specifications

General IconGeneral
BrandBenchmark
ModelBCT24M
CategoryLawn Mower
LanguageEnglish

Related product manuals