Benchmark BCT24M - Page 54

54
Malfunction
Cause
Remedy
Engine is losing power.
(Continued)
Carburetor stetting
incorrect.
Have the setting checked
(customer service by a
specialized after-sales
center).
Blade severely worn down.
Renew or regrind blade.
Reground blade must be
balanced. (customer
service by a specialized
after-sales center).
Driving speed too fast.
Reduce driving speed.
Ride-on mower vibrates
extensively
Mower mechanism is
damaged.
Check mower mechanism
(customer service by a
specialized after-sales
center).
Rough cut.
Blade worn out.
Renew or regrind blade.
Reground blade must be
balanced. (customer
service by a specialized
after-sales center).
Incorrect cutting height.
Correct the cutting height.
Engine speed too slow.
Set maximum engine
speed.
Driving speed too fast.
Reduce driving speed.
Different tire pressure at
wheels.
Inflate to correct air
pressure. Match to the
correct tire pressure listed
on tire.