Bender LINETRAXX RCM420 - Time Delay Configuration; Setting the response delay ton1; Setting the starting delay t; Changeover: overcurrent;undercurrent;window mode

LINETRAXX® RCM420
Setting the response delay t
on1
t
on
1
s
t
on
1
s
t
on
1
s
t
on
1
s
3x
> 1,5 s
Setting the starting delay t
t
on
1
s
t
s
t
s
t
s
t
s
2x
2x
> 1,5 s
5.6 Changeover: overcurrent/undercurrent/window mode
The operating mode can be changed in the SEt/I 12 menu using the parameters HI, Lo and In. By default,
overcurrent operation (HI) is set.
Changing from overcurrent operation to window operation
Use this menu item to set whether the response values of the device apply to overcurrent (HI) or undercurrent
operation (Lo). In addition, window operation (In) can be selected.
12
I
1
2
I
12I 12I
2x
>1,5 s
RCM420_D00057_06_M_XXEN/12.2023 23