BENDIXKing UHF/VHF Radio - Page 5

PRG
!
3 *-
c
Q-Jlj5
J ----_----- .--_---____.--__
Press the [FCN] key repeatedly to view
the settings in Channel 0, then loop back
to the Ch 00 entry point. Channel 0
settings include:
Automatic Number Identification
(ANI)
Transmitter Time Out Timer
Scan Delay Time
Group One functions:
Battery Saver
Priority Scan Operation
Priority Key Lockout
Scan List Lockout
Group Two functions:
Enable User Code Guard
Busy Channel Operation
ANI Enable
DTMF Enable
*Group Three functions:
*Backlight Enable Conditions
*Alphanumeric Mode Enable
*Backlight Duration
*Group Label
NOTE: Illustrations show an Alphanumeric Display. The same
procedures are also used to program radios with a standard
7-Segment display, except the procedures marked with an
asterisk (Alphanumeric Display only).
* Alphanumeric Display only
4
BENDIX/KING