Ⅲ. Maintenance and Correct Application
Ⅲ-1 Maintenance
When the cycle is used, many components are abraded and worn and fasteners such as screws may be loosened,
wh
ich may
cause malfunction and even danger during riding if not noticed. Therefore, ordinary check and maintenance are required.
Maintenance:
To ensure safety during riding, please check all screws and moving parts once every month. Routine maintenance
o
n brake,
transmission and others shall be guaranteed to keep normal functions of all parts any time. For details, please make
reference to the following table:
1 Position of Hand bar & saddle
2 Moving or abrarion of steering system
3 Moving or abrarion of bottom bracket and pedal
5 Moving or abrarion of bearing in Front and rear
hub
9 Position of brake lever
10 Distortion of chainwheel and Crank
11 Distortion and runout of rim
12 Losen or fracture of spoke
13 Distortion or break of fender
14 Distortion of frame and fork
To Next Page
