Beninca BULL624 SW - Page 54

EU Certificato di Conformità (DOC)
Nome del produttore:
Indirizzo:
Codice postale e Città:
Telefono:
E-mail:
Dichiara che il documento è rilasciato sotto la propria responsabilità e appartiene al seguente prodotto:
Modello/Tipo:
Tipo di prodotto:
Il prodotto sopraindicato risulta conforme alle disposizioni imposte dalle seguenti direttive:
Sono state applicate le norme armonizzate e le specifiche tecniche descritte di seguito:
Organismo notificato (se applicabile):
Ulteriori informazioni:
Firmato per conto di:
Automatismi Benincà SpA
Via Capitello, 45
36066 - Sandrigo (VI) - Italia
+39 0444 751030
sales@beninca.it
BULL 424 SW / BULL 624 SW
Attuatore elettromeccanico 24Vdc per cancelli scorrevoli
Direttiva 2014/53/EU
Direttiva 2011/65/EU
Inoltre il prodotto risulta essere conforme alla seguente direttiva secondo i requisiti previsti per le
quasi macchine:
Direttiva 2006/42/CE
ETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.1.1
ETSI EN 301 489-1 V2.1.1
ETSI EN 301 489-3 V2.1.1
EN 62368-1:2014 + A11:2017 + AC:2017
EN 61000-6-2:2005, EN 61000-6-3:2007 + A1:2011
EN 60335-1:2012 + A11:2014; EN 60335-2-103:2015
50581:2012
EN 13241-1:2016
EN 12453:2017, EN 12978:2008 (se applicabile)
Sandrigo,
03/05/2022
Luigi Benincà, Responsabile legale
Manufacturer’s name:
Postal Address:
Post code and City:
Telephone number:
E-mail address:
EU Declaration of Conformity (DOC)
Declare that the DOC is issued under our sole responsibility and belongs to the following product:
Model/Product:
Type:
The object of the declaration described above is in conformity with the relevant Union harmonization legislation:
The following harmonized standards and technical specifications have been applied:
Notified body (where applicable):
Additional information:
Signed for and on behalf of:
Automatismi Benincà SpA
Via Capitello, 45
36066 - Sandrigo (VI) - Italia
+39 0444 751030
sales@beninca.it
BULL 424 SW / BULL 624 SW
Sandrigo,
03/05/2022
Luigi Benincà, Responsabile legale
Directive 2014/53/EU
Directive 2011/65/EU
In addition, the product complies with the following directive according to the requirements for
partly completed machines:
Directive 2006/42/CE
ETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.1.1
ETSI EN 301 489-1 V2.1.1
ETSI EN 301 489-3 V2.1.1
EN 62368-1:2014 + A11:2017 + AC:2017
EN 61000-6-2:2005, EN 61000-6-3:2007 + A1:2011
EN 60335-1:2012 + A11:2014; EN 60335-2-103:2015
50581:2012
EN 13241-1:2016
EN 12453:2017, EN 12978:2008 (se applicabile)
Electromechanical actuator 24Vdc for sliding gates
Manufacturer’s name:
Postal Address:
Post code and City:
Telephone number:
E-mail address:
EU Declaration of Conformity (DOC)
Declare that the DOC is issued under our sole responsibility and belongs to the following product:
Model/Product:
Type:
The object of the declaration described above is in conformity with the relevant Union harmonization legislation:
The following harmonized standards and technical specifications have been applied:
Notified body (where applicable):
Additional information:
Signed for and on behalf of:
Automatismi Benincà SpA
Via Capitello, 45
36066 - Sandrigo (VI) - Italia
+39 0444 751030
sales@beninca.it
BULL 424 SW / BULL 624 SW
Sandrigo,
03/05/2022
Luigi Benincà, Responsabile legale
Directive
2014/53/EU
Directive
2011/65/EU
In
addition, the product complies with the following directive according to the requirements for
partly
completed machines:
Directive
2006/42/CE
ETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.1.1
ETSI EN 301 489-1 V2.1.1
ETSI EN 301 489-3 V2.1.1
EN 62368-1:2014 + A11:2017 + AC:2017
EN 61000-6-2:2005, EN 61000-6-3:2007 + A1:2011
EN 60335-1:2012 + A11:2014; EN 60335-2-103:2015
50581:2012
EN 13241-1:2016
EN 12453:2017, EN 12978:2008 (se applicabile)
Electromechanical actuator 24Vdc for sliding gates
Manufacturer’s name:
Postal Address:
Post code and City:
Telephone number:
E-mail address:
EU Declaration of Conformity (DOC)
Declare that the DOC is issued under our sole responsibility and belongs to the following product:
Model/Product:
Type:
The object of the declaration described above is in conformity with the relevant Union harmonization legislation:
The following harmonized standards and technical specifications have been applied:
Notified body (where applicable):
Additional information:
Signed for and on behalf of:
Automatismi Benincà SpA
Via Capitello, 45
36066 - Sandrigo (VI) - Italia
+39 0444 751030
sales@beninca.it
BULL 424 SW / BULL 624 SW
Sandrigo,
03/05/2022
Luigi Benincà, Responsabile legale
Directive
2014/53/EU
Directive
2011/65/EU
In
addition, the product complies with the following directive according to the requirements for
partly
completed machines:
Directive
2006/42/CE
ETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.1.1
ETSI EN 301 489-1 V2.1.1
ETSI EN 301 489-3 V2.1.1
EN 62368-1:2014 + A11:2017 + AC:2017
EN 61000-6-2:2005, EN 61000-6-3:2007 + A1:2011
EN 60335-1:2012 + A11:2014; EN 60335-2-103:2015
50581:2012
EN 13241-1:2016
EN 12453:2017, EN 12978:2008 (se applicabile)
Electromechanical actuator 24Vdc for sliding gates