9 How to assemble your monitor hardware
5. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
‘POWER IN’ on the rear of the monitor. Do not connect
the other end to a power point just yet.
6. Turn on the power.
Plug the other end of the power cord into a power point
and turn it on.
Turn on the monitor by pressing the power button on the
front of the monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
on page 11
to install the monitor software.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
