BenQ GL2450 User Manual

10 How to assemble your monitor hardware
If the screen size is 27 inches, follow the illustrations on the
right to attach the monitor stand and the base. Tighten the
screw that fixes the stand to the monitor. Use of a flat-head
screwdriver is recommended.
Gently attempt to pull them back apart to check that
they have properly engaged.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2
1
1
2
1
2
-5
O
~ +15
O
-5
O
~ +15
O

BenQ GL2450 Specifications

General

3D	No
Pixel pitch	0.276 x 0.276 mm
Aspect ratio	16:9
Display surface	Gloss
Display diagonal	24 \
Vertical scan range	50 - 76 Hz
Horizontal scan range	30 - 83 kHz
Viewable size, vertical	298.89 mm
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	12000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	531.36 mm
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	Yes
DVI-I ports quantity	0
Product color	Black
Market positioning	-
Tilt angle range	-5 - 15 °
Number of OSD languages	17
Panel mounting interface	100 x 100 mm
Power consumption (standby)	- W
Power consumption (typical)	34 W
Power consumption (PowerSave)	0.3 W
Cables included	VGA
Package depth	420 mm
Package width	134 mm
Package height	650 mm
Package weight	5600 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (without stand)	179.12 mm
Width (without stand)	579.39 mm
Height (without stand)	436.49 mm
Weight (without stand)	4100 g