To Next PageTo Next Page
Need help?Do you have a question about the BENSHAW RediStart MX3 Series and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Frequency | 50/60 Hz |
| Bypass | Optional |
| Overload Protection | Electronic Overload Protection |
| Enclosure Rating | IP20, IP54 |
| Enclosure Type | NEMA 1, NEMA 12 |
| Communication | Modbus RTU |
| Protection Features | Phase Loss |
| Operating Temperature | -10°C to 40°C |
| Humidity | 5% to 95% non-condensing |
| Storage Temperature | -20°C to 70°C |
Details internal measurements, accuracies, and list of motor protection features.
Lists power ratings for various duties like standard, heavy, and severe.
Covers inspection, general information, and critical safety guidelines.
Details site preparation, EMC guidelines, and specific connection considerations.
Step-by-step guide for setting data and parameters via the keypad.
Explains Current Ramp, Kick Current, TruTorque, Power, Voltage, and Tachometer ramps.
Explains the advanced I2t electronic motor overload protection function.
Covers essential safety practices and routine maintenance procedures.
Provides guidance for common issues like motor start failures.
Lists all possible faults and their detailed descriptions and solutions.
Details Built-In Self Test modes and SCR replacement procedures.
