EasyManua.ls Logo

Beper Ice Cube P102CON550 - Page 9

Beper Ice Cube P102CON550
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ice Machine Use Instructions
9
EN
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other uids.
Do not use the appliance near explosives, highly ammable mate-
rials, gases or burning ames.
Do not allow children, disabled people or every
people without experience or technical ability to
use the appliance if they are not properly watched
over. Close supervision is necessary when any ap-
pliance used by or near children.
Specic warnings
Once you have purchased the product, leave it unused on a at surfa-
ce for at least 24 hours to stabilize the coolant.
When adding water, make sure that the silicone cap placed under the
base of the product is tightly closed.
It is recommended to use bottled water as it contains less impurities
and solid particles.
Place the product away from direct sun and heat sources, on a at
surface and making sure to leave at least 15 cm of free space near the
fans and the back of the appliance.
It is recommended to clean the product before proceeding with the rst
use.
Do not immerse the product in water or other liquids.
Do not use the product if the power cord is damaged.
If the product emits abnormal noises or odors, turn off the product and
unplug it. Contact support.
Do not touch the area where ice cubes are formed while the product
is in operation.
The ice may have a bad smell if the water is of poor quality and / or
dirty and may appear on rst use. In this case, do not use the ice pro-
duced in the rst 2/3 cycles.